Posts
Horizontal Well Drillers (HWD) is a major provider in contract drilling services. We offer our customers up-to-date drill rigs with innovati...
Friday, August 23, 2013
LOAN PROCESSOR (GLENDALE/SHERMAN OAKS)
Posting ID: 3679438980Posted: 2013-03-13, 3:22PM PDTEdited: 2013-03-13, 3:22PM PDTemail to a friendSorry, I could not read the content fromt this page.
CNPC said set to buy $5 billion stake in largest Kazakh field
CNPC’s largest overseas acquisition will deepen Kazakhstan’s relationship with China as the start of production at Kashagan, eight years late and at double the original cost, boosts oil exports. Nariman Gizitdinov/BloombergChina National Petroleum Corp (CNPZ). plans to pay about $5 billion for a stake in Kazakhstan’s biggest oil field, people with knowledge of the matter said.
CNPC is planning to acquire 8.33 percent in the Kashagan project from state oil company KazMunaiGaz National Co., two of the people said, asking not to be named before the deal is public. An announcement may be made as soon as next week, two of the people said.
KazMunaiGaz will maintain its holdings in Kashagan, due to start production in September, by exercising an option to acquire 8.4 percent of the project from ConocoPhillips, the people said. While Conoco agreed to sell to India’s Oil & Natural Gas (ONGC) Corp. last year, as the state oil company, KazMunaiGaz has the right to step in and buy the shares.
CNPC’s largest overseas acquisition will deepen Kazakhstan’s relationship with China as the start of production at Kashagan, eight years late and at double the original cost, boosts oil exports. A pipeline linking Kazakhstan and China opened in 2006 and is being expanded to 400,000 barrels a day from 240,000 barrels a day.
Li Runsheng, CNPC’s Beijing-based spokesman, didn’t answer three calls to his office. Officials at KazMunaiGaz and the Kazakh government declined to comment immediately and asked for written questions. ONGC Chairman Sudhir Vasudeva didn’t answer two calls to his mobile phone seeking comments.
After KazMunaiGaz completes both deals it will have a stake of 16.88 percent of the Kashagan project, one of the people said. Exxon Mobil Corp (XOM)., Royal Dutch Shell Plc (RDSA), Total SA (FP) and Eni SpA (ENI) hold 16.81 percent each. Japan’s Inpex Corp (1605). has 7.56 percent.
Double Estimates
Kashagan, a Caspian Sea field slated to produce as much as 370,000 barrels of oil a day, will cost $48 billion, double early estimates.
The deal will be CNPC’s largest overseas acquisition, overtaking a $4.2 billion deal earlier this year to buy a stake in gas fields in Mozambique from Italy’s Eni.
Kazakh President Nursultan Nazarbayev said yesterday that the country is studying whether to buy Conoco’s stake in Kashagan, according to his website.
TEACHER or TEACHER'S AID POSITION for Learning Center (Monterey Park)
Position will begin ASAP and will lead to a full-time position during our 8 week summer program.
QUALIFICATIONS for teacher's aid
-High school graduate, currently enrolled in a college or university
-maintains a minimum 3.0 GPA
-possesses current and valid CA Driver's License, own transportation & current auto insurance
-must enjoy working with school-age students (Kinder to 8th grade)
-detail oriented and able to maintain accurate records
-responsible, punctual, diligent & patient
JOB DESCRIPTION for teacher's aid
-correct homework assignments submitted by school-age students
-assist classroom teacher with assignment corrections
-office duties (i.e. copying, filing, answering telephone)
-maintain assignment correction records
-supervise students when necessary
-basic cleaning duties (i.e. vacuuming, wiping down desks)
QUALIFICATIONS for teacher
-College or University graduate; will accept interviews from college or university junior or senior status students
-experience working with school-age students
-graduated or currently maintains a minimum 3.0 GPA
-able to handle a group of students in a classroom environment and maintain order
-possesses current and valid CA Driver's License, own transportation & current auto insurance
-must enjoy working with school-age students (Kinder to 8th grade)
-detail oriented and able to maintain accurate records
-responsible, punctual, diligent & patient
JOB DESCRIPTION for teacher
-maintain order in classroom of 16 students
-correct homework assignments for 5th grade students
-maintain accurate records of assignments
-distribute and correct supplemental English & Math packets (will be provided)
-maintain a clean and organized classroom environment
To apply: Please send your resume as an attachment and paste it in the body of the email. Title the email with the position you are interested in i.e. "Teacher position"
Posting ID: 3679427041
Raise $$ for NonProfits! Telephone For Great Causes! PT/FT($8-16/hr) (Wilshire and Normandie)
Reply to: see below
Rig Welder ( Carson, CA ) - Transfield Services - Carson, CA
POSITION: Rig Welder REPORT TO: Welding Supervisor \ABS\Auto Blog Samurai\data\Rig Jobs Engineer Manager Oil And Gas\indeed\)
Transfield Services delivers essential services to key industries in the Resources and Industrial, Infrastructure Services and Property and...
DIVISION: Field Operations ORGANIZATION: R&E
DATE: 06/27/2013 FLSA STATUS: Non exempt
OVERVIEW: POSITION DESCRIPTION
Rig Welder (includes Exotic welders) has capabilities and is or can certify/qualify to weld different alloy metals, such as carbon steel, stainless, chrome, Inconel, nickel, etc. Lays out and fabricates/welds pipe and fittings, welds on tanks, pressure vessels, furnace shells and tubes. Applies knowledge of geometry, physical properties and welding techniques. Reads and interprets blueprints. Reads and works from isometric piping drawings. A rig welder owns and operates his own truck and equipment.
JOB REQUIREMENTS
Key Work Experiences/Education:
High school education or equivalent preferred Minimum of 4 years experience in construction, maintenance or turnaround, with at least 2 years in the oil and gas industry Welders will be required to pass certification testing set up and scheduled by the company
Technical/Functional competencies required for selection:
Operate mobile motorized vehicles and motorized equipment, as trained. Must demonstrate the ability to comprehend and recognize all job related work permits and complete Job Hazard Analysis. Must be able to follow and comprehend supervisor’s instructions. Must have the ability to perform basic math skills, such as addition, subtraction, multiplication, and division. Must be fluent at reading, speaking, and writing English. Must demonstrate rigging skills and utilization of crane hand signals. Must demonstrate adequate pipe welding skills by successfully passing a series of 6G position tests as required by QC Manager. Must be able to maintain communications with Transfield supervisors of job status and current assigned responsibilities. Must be able to maintain a clean jobsite free of tripping hazards and unnecessary obstacles. Must demonstrate knowledge of entry requirements for columns, vessels and heaters. Must be able to troubleshoot and solve problems.
Challenges:
Must be capable of working in a fast paced environment. Must be capable of working outdoors in all types of weather conditions. Must be able to bend, squat and kneel. Must be capable of climbing ladders and scaffolds and working at heights. Must be able to lift and carry up to 60 pounds unassisted. Must be able to work in confined spaces. Must be able to perform work wearing personnel protective equipment. Including but not limited to the following: rain gear, chemical protective clothing, supplied air and air purifying respirators, safety harness, sand blast hoods, Nomex coveralls, hard hat, ear plugs and safety glasses. Must be able to work long hours and all shift schedules that may be up to seven days a week for extended duration’s of up to 8 weeks or more.
Successful candidate must meet all conditions of Transfield Services Resources & Energy Drug and Alcohol testing requirements as a condition of employment. Drug/alcohol screening is administered post-offer and pre-employment.
Essential Job Functions
In accordance with the Americans with Disabilities Act (ADA), both the analysis of work and the position description must focus on essential functions and what are actually required and not the ways they are currently or customarily performed. “The term essential function means the fundamental job duties of the employment position the individual with a disability holds or desires.” (Reference 29 CFR §1630.2(n)(1).) The physical demands for this position is as follows: stretching, walking, stooping, kneeling, crouching and/or crawling; reaching, handling, talking, hearing; seeing; or other demands (e.g., smelling).
CONTACT: If you are interested in applying for this position, please submit your resume to Career Center, www.transfieldservices.com
Transfield Services Resources & Energy is an Equal Opportunity Employer
Partners for Change | We lead the way | We do what’s right | We care for each other | We take responsibility
Consider the environment and ‘Think before you print’
Transfield Services - 11 hours ago - save job - block
Sales and Marketing Associates - CA 07 (West Covina, Arcadia, Montebello)
Reply to: 22mt6-3679441397@job.craigslist.org [?]
FLOORHAND - Parker Drilling Company - Mexico, MO
Stop ! Before filling out this application read the statement below.
It is imperative that you fill out Parker Drillings application completely, correctly, and accurately. Without accurate information (i.e. dates, phone numbers, positions etc.) your application may not be considered for employment. Applications deemed as being inaccurate (falsified) will not be considered for employment.
Due to the large volume of applications received by Parker Drilling Company, we may only consider applications that are filled out completely, correctly and accurately. Also, as an applicant, you increase your chances of getting hired if your application is completely filled out.
SUMMARY
A Floorhand is a crew member whose primary work station is on the rig floor.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
-- Tripps pipe (consists of using slips, tongs and elevators), lines up choke or kill manifold and makes connections while drilling.
-- Nipples BOP's -- up and down.
-- Relieves Derrickhand in Derrick while tripping pipe or on pits while eating, assists in mixing drilling mud or lost circulation material and chemicals, and acts as Flag Crane Operator or Driller when Operator cannot see loads.
-- Shaker duties: Monitors mud weight, viscosity and sand weight while drilling.
-- Performs general maintenance of drawworks, rotary transmission, and rotary table oils.
-- Performs chipping and painting on rig floor, loads and off-loads pipe, assists in rig movement (help with rig-up / rig-down), and rig maintenance.
-- Inspections of all safety equipment, TIW valve, inside BOP valve, choke manifold and accumulator unit.
-- Monitors hole fill-ups while pulling out of hole, lining up trip tanks, runs air/hydraulic hoist (lowering and lifting), checks for leaks on BOP stack, and measures pipe.
-- Checks snub lines, pull lines, shackles, and cable clamps to see that they are in good condition.
-- Checks dies in slips and tongs, fluid level in Koomey Unit, and all safety and riding belts to make sure they are in good condition.
-- Mixes sack chemicals, runs casing, tags casing through V-door, and unhooks cables from casing, tulung and drill pipes.
-- Changes drill / trip recorder and change chart.
-- Responds to emergency situations including, but not limited to, wellbore influxes, hydrogen sulfide detection and major mechanical or structural failures.
-- Must be capable of quickly evacuating the facility to avoid injury during emergencies, assists in rescue operations for injuries or overcome personnel.
-- Assists with repairs and maintenance of large mud pumps, shale shaker, desander, desilter, and degasser units.
-- Responsible for moving joints of casing to the catwalk during casing job. Assists with attaching casing to pick-up lines so casing can be lifted to the rig floor.
-- Responsible for rolling drill pipe to or from catwalk, attaching or detaching the pick-up lines, and using drill pipe tongs, spinning chain, air spinners, slips, as well as handling drill pipe joints.
-- Cleans the mast and substructure with a high-pressure steam cleaning unit. Scrubs and paints mast, substructure, etc.
-- Digs and/or cleans ditches around the drilling rig daily. Also cleans out mud pits twice monthly.
SUPERVISORY RESPONSIBILITIES
-- None.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
-- Must possess a High School diploma.
-- Requires at least 3 years verifiable work experience.
* Duties and responsibilities may be added or changed at any time at the discretion of your manager, formally or informally, either verbally or in writing.
LANGUAGE SKILLS
-- Must possess good oral and written communication skills.
MATHEMATICAL SKILLS
-- Must possess basic math skills.
ABILITY
-- Must possess good reasoning skills.
-- Must not pose a direct threat or significant risk of substantial harm to the safety or health of himself/herself or others.
-- Must be committed to a high standard of safety and be willing and able to comply with all safety laws, regulations and company’s safety policies.
CERTIFICATES, LICENSES, REGISTRATIONS
-- None.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Sitting, standing, walking, lifting materials (maximum 100 pounds), carrying, pushing, pulling, climbing stairs, climbing using legs and arms, balancing, stooping, kneeling, repeated bends, crawling, reaching high and low, and repetitive twisting or pressure, involving wrist and hands. Hearing, seeing (including depth perception and peripheral vision), ability of rapid mental coordination simultaneously. Must be able to tolerate continuous vibrations and elevated noise levels as well as tolerate wearing personal protective equipment, including, but not limited to, a hard hat, steel toed safety shoes, hearing protection, respirators, safety glasses, goggles and full body harness. Mentally alert for entire regular shift.
WORK ENVIRONMENT
This position works in various locations – both in the U.S. and internationally. In international locations, may be subject to extreme temperatures, hostile environments, civil unrest, etc. Also, travel to and from work location may require extended layovers in unfamiliar locations. Exposure to temperature changes, wetness, confined spaces, chemicals, grease and oil, working with ladder/scaffold, working with hands in water, and working alone. Parker Drilling Company will supply adequate training and equipment to meet the functions of the job.
Lumber Yard / Driver Position (90247)
? Working with/moving lumber, beams and other materials.
? Driving to Mills, Customers and other various locations
? De-nailing and metal detecting.
? Organizing stock/ maintaining inventory.
? Assist customers in loading. Must be able to communicate effectively and kindly with customers.
? Receiving deliveries.
? Operate a forklift
? Write routine reports
? Communicate with Yard Admin/ and staff at other location
? Assist in keeping yard tidy, flooring covered and yard organized
Pluses include knowledge of wood working/carpentry skills, experience with hand saws and other milling equipment, and owning your own truck.
Good communication skills and the ability to both take direction and work independently required. This position involves consistent work attendance, problem solving, and the ability to communicate effectively.
English is a must, Spanish a Plus. Must have CLEAN Driving Record. Class B License REQUIRED.
Please put in subject line "Lumber Yard / Driver Position". Attach a resume and a copy of your driving record (if available).
Pay is DOE. Posting ID: 3678683077
Valero plant will produce diesel from animal fat
Production of biomass-based diesel fuel has begun at the Diamond Green Diesel plant, where green tanks that store animal fat are shown. The plant, a joint venture of Valero Energy Corp. and Darling International Inc., produces renewable diesel fuel that Valero will market. The plant is located at Valero’s St. Charles refinery in Louisiana, (bottom right) where it has access to a rail line and docks. (Darling International Inc.)Valero Energy Corp.’s investments in renewable fuel moved forward Thursday with the completion of a plant that soon will produce renewable diesel fuel from fat.
In a venture known as Diamond Green Diesel LLC, the San Antonio refiner joined 50-50 partner Darling International Inc. of Irving to build the $413 million plant at Valero’s St. Charles refinery near New Orleans.
At full production, the plant will produce 9,300 barrels a day of renewable diesel from animal fat, cooking oil and corn oil into renewable diesel, Darling said in a statement.
The diesel will help refiners meet federal requirements that certain volumes of renewables be blended into transportation fuels.
Valero will market the diesel produced at the plant, which company spokesman Bill Day said will be “a premium product, because unlike other types of biodiesel, it is nearly identical to petroleum-based diesel and can ship by pipeline.”
Diesel demand: Gulf Coast diesel exports to rise as production hits 23-year high
About $50 million was shaved from the plant’s cost because it was built on land at Valero’s refinery and will use existing utilities and infrastructure, Day said. In addition, the site is near a rail line and docks.
Diamond Green Diesel is leasing the site from Valero. Terms of the lease were not disclosed.
In a presentation to investors, Darling said the plant will always have available feedstock. But the venture has the flexibility to purchase feedstock from other suppliers if it’s more economical.
The plant will use a three-stage process to turn fats into fuel using hydrogen and catalysts.
Alternative diesel:Tesoro to buy ‘green’ crude oil
In June 2011, Valero turned down a loan guarantee from the Energy Department for the Diamond Green Diesel plant and chose to finance the project internally. The federal loan program “was costly and unwieldy,” Day said.
Diamond Green Diesel is one of a number of investments Valero has made in renewable energy ventures. The company owns 10 ethanol plants in the Midwest and a 50-megawatt wind farm at its McKee refinery north of Amarillo.
Darling recycles beef, poultry and pork by-products into useable ingredients such as feed-grade fats. It also recovers and converts used cooking oil and commercial bakery waste into feed and fuel ingredients. Also, the company collects grease from restaurants.
SELL A PRODUCT YOU WILL BE PROUD OF AND EARN UP TO $1100/WEEK + MORE! (Montrose, CA)
Reply to: bpjnq-3679377688@job.craigslist.org [?]
Offshore Rig Clerk - Clover Global Solutions LP - United States
Houston
Clover Global Solutions LP - 11 hours ago - save job - block Clover Global Solutions, LP provides Oil & Gas companies flexible and cost effective solutions fulfilling today's need for contingent hu...
Do you want to work with the best employees, be intellectually stimulated and better utilize your knowledge, skills and perspectives? Apply for this Offshore Rig Clerk position today and join our winning team of contract staff, alumni, retirees and annuitants! Clover Global Solutions provides the most sought after professional/technical talent in the Oil and Gas Industry. We are offering a $500.00 success fee for referring a Candidate to us who is hired by Clover. If you know someone for this job, contact us today!
The Offshore Rig Clerk is accountable for performing logistical, procurement, accounting and clerical duties as directed by the Well Site Leader. Essential duties and responsibilities include the following. Other duties may be assigned : * Coordinates the logistics of material and equipment for rig and production operations. * Communicates with the Well Site Leader on status of logistics coordination. * Adheres to all federal and state regulatory requirements associated with the shipping of hazardous material * Ensures all data including the daily cost are entered in to Open Wells for daily report submission. * Manages field tickets received from vendors and ensures proper AFE and paykey numbers are used. Interacts with company employees, contractors and outside vendors including : * Offshore team including rig and production personnel * Third party suppliers and contractors * Logistics and Shorebase personnel * Drilling and completion engineers * D&C Technologist * Cost Analyst * HSSE Advisor * Supply Chain Management Any Other Relevant Information
High school diploma or equivalent, with previous experience as an Offshore Rig Clerk, preferably in deepwater operations.A total commitment to working safely and participating in all HSSE programs.English language skills, both written and verbal.Excellent communication and teamwork skills.Excellent computer skills including Microsoft Word and Excel and Open Wells.Must be a proactive self-starter and have ability to work with a minimum of supervision.Must be able to analyze problems encountered during work activity and recommend solutions.Must be able to manage time effectively to complete daily assignments.Position requires working a 14/14 rotation and requires helicopter travel to and from the offshore facility. Travel to the offshore facility requires a TWIC card.Clover Global Solutions LP - 11 hours ago - save job - block Clover Global Solutions, LP provides Oil & Gas companies flexible and cost effective solutions fulfilling today's need for contingent hu...
Seeking Several Outside Sales Rep Needing Extra $$$ (Los Angeles County)
1. Looking for several outside sales reps to place charity clothing bins all over Los Angeles County for a non-profit organization. For example, plazas, strip malls, gas stations, churches, schools, malls, etc.,.
2. You will get paid $145 90 days after bin placement.
!$!$You will get paid $300 to $400 per bin placement.$$$$$
3. You will get a $155 bonus in 90 more days after your first payment for every bin you placed.
4. Need 100 bins placed within 6 months. If 100 bins are placed within 6 months an extra $100 bonus will be given in 90 more days.
Job Requirements - Cell phone with calling, text and internet capabilities. Access to internet and printer. Reliable transportation. Bilingual preferred, but not necessary. Good English is Mandatory.
Please no resumes. Send e-mail with name, telephone number and e-mail and how many bins you will place a week and your plan on doing it. Posting ID: 3679411851
Posted: 2013-03-13, 3:08PM PDTEdited: 2013-03-13, 3:08PM PDTemail to a friend
Subscribe to:
Posts (Atom)