FLOORHAND - Parker Drilling Company - Mexico, MO

Stop ! Before filling out this application read the statement below.

It is imperative that you fill out Parker Drillings application completely, correctly, and accurately. Without accurate information (i.e. dates, phone numbers, positions etc.) your application may not be considered for employment. Applications deemed as being inaccurate (falsified) will not be considered for employment.

Due to the large volume of applications received by Parker Drilling Company, we may only consider applications that are filled out completely, correctly and accurately. Also, as an applicant, you increase your chances of getting hired if your application is completely filled out.

SUMMARY

A Floorhand is a crew member whose primary work station is on the rig floor.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

-- Tripps pipe (consists of using slips, tongs and elevators), lines up choke or kill manifold and makes connections while drilling.

-- Nipples BOP's -- up and down.

-- Relieves Derrickhand in Derrick while tripping pipe or on pits while eating, assists in mixing drilling mud or lost circulation material and chemicals, and acts as Flag Crane Operator or Driller when Operator cannot see loads.

-- Shaker duties: Monitors mud weight, viscosity and sand weight while drilling.

-- Performs general maintenance of drawworks, rotary transmission, and rotary table oils.

-- Performs chipping and painting on rig floor, loads and off-loads pipe, assists in rig movement (help with rig-up / rig-down), and rig maintenance.

-- Inspections of all safety equipment, TIW valve, inside BOP valve, choke manifold and accumulator unit.

-- Monitors hole fill-ups while pulling out of hole, lining up trip tanks, runs air/hydraulic hoist (lowering and lifting), checks for leaks on BOP stack, and measures pipe.

-- Checks snub lines, pull lines, shackles, and cable clamps to see that they are in good condition.

-- Checks dies in slips and tongs, fluid level in Koomey Unit, and all safety and riding belts to make sure they are in good condition.

-- Mixes sack chemicals, runs casing, tags casing through V-door, and unhooks cables from casing, tulung and drill pipes.

-- Changes drill / trip recorder and change chart.

-- Responds to emergency situations including, but not limited to, wellbore influxes, hydrogen sulfide detection and major mechanical or structural failures.

-- Must be capable of quickly evacuating the facility to avoid injury during emergencies, assists in rescue operations for injuries or overcome personnel.

-- Assists with repairs and maintenance of large mud pumps, shale shaker, desander, desilter, and degasser units.

-- Responsible for moving joints of casing to the catwalk during casing job. Assists with attaching casing to pick-up lines so casing can be lifted to the rig floor.

-- Responsible for rolling drill pipe to or from catwalk, attaching or detaching the pick-up lines, and using drill pipe tongs, spinning chain, air spinners, slips, as well as handling drill pipe joints.

-- Cleans the mast and substructure with a high-pressure steam cleaning unit. Scrubs and paints mast, substructure, etc.

-- Digs and/or cleans ditches around the drilling rig daily. Also cleans out mud pits twice monthly.

SUPERVISORY RESPONSIBILITIES

-- None.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

-- Must possess a High School diploma.

-- Requires at least 3 years verifiable work experience.

* Duties and responsibilities may be added or changed at any time at the discretion of your manager, formally or informally, either verbally or in writing.

LANGUAGE SKILLS

-- Must possess good oral and written communication skills.

MATHEMATICAL SKILLS

-- Must possess basic math skills.

ABILITY

-- Must possess good reasoning skills.

-- Must not pose a direct threat or significant risk of substantial harm to the safety or health of himself/herself or others.

-- Must be committed to a high standard of safety and be willing and able to comply with all safety laws, regulations and company’s safety policies.

CERTIFICATES, LICENSES, REGISTRATIONS

-- None.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Sitting, standing, walking, lifting materials (maximum 100 pounds), carrying, pushing, pulling, climbing stairs, climbing using legs and arms, balancing, stooping, kneeling, repeated bends, crawling, reaching high and low, and repetitive twisting or pressure, involving wrist and hands. Hearing, seeing (including depth perception and peripheral vision), ability of rapid mental coordination simultaneously. Must be able to tolerate continuous vibrations and elevated noise levels as well as tolerate wearing personal protective equipment, including, but not limited to, a hard hat, steel toed safety shoes, hearing protection, respirators, safety glasses, goggles and full body harness. Mentally alert for entire regular shift.

WORK ENVIRONMENT

This position works in various locations – both in the U.S. and internationally. In international locations, may be subject to extreme temperatures, hostile environments, civil unrest, etc. Also, travel to and from work location may require extended layovers in unfamiliar locations. Exposure to temperature changes, wetness, confined spaces, chemicals, grease and oil, working with ladder/scaffold, working with hands in water, and working alone. Parker Drilling Company will supply adequate training and equipment to meet the functions of the job.

View the original article here