Seismic QC field engineer

Seismic QC field engineer
Poland
28/28 Rotary
£ Enterprising

We are currently recruiting for a number of seismic specialized field that QC engineer of work on the basis of rotation 28/28.

The main duties of the role will bring with it;

one) working with seismic contractor company seismic HES, economics, operations and technical related targets efficiency and quality
b) holding of seismic Project Coordinator and work with the seismic contractor company to optimize the seismic contractor work plan and to minimize downtime
c) Supervise gravity, surveying, recording, processing and field operations uphole/refraction profile
d) offer supervision of all field operations including country to allow access and verification of the status of permits and compensation for damage caused by the inclusion of every seismic line
e) offer daily technical supervision of the seismic activities including monitoring and QC of all instrument tests of the recording equipment on a daily and monthly basis, as well as at the beginning and by the duration of the seismic program
f) verify the condition of hydrophones, geophones, cables and recording equipment ensure test values and results are within manufacturer specifications and quality standards company
g) ensure the monitoring and understanding of both explosive and vibroseis acquisition including procedures and technical QA tests/QC of vibrators
h) QA/QC all aspects of acquisition including surveying, seismic data uphole/refraction profile recording, recording and processing field
i) to reveal company per seismic line: field record evaluation (low energy, parity errors, noise level, positioning errors, frequency content), sledge/source point moving, jumps/receiver point move, dead spores, displaced persons or restored shots and all other factors that affect the quality seismic data and control
j) participate in and recommendations for acquisition parameters on the basis of test parameter for both explosive and vibroseis source including peak particle speed tests and analysis
k) position quality control to ensure that company work standards and industry best practices are followed
l) perform daily review and QC of the geometry of the survey in which all company-approved changes and to ensure that all proposed changes are made according to company land seismic specifications and the technical requirements of the survey design while reducing risks and exposure to personnel and equipment
m) review shot point cards, test reports and end of field activities/operations of the company presented by the seismic contractor
n) strictly monitoring compliance with environmental standards and regulations, archaeological conservation and monitoring of the application of the conditions and the recommendations of the Environmental Management Plan for the seismic program
o) HES support company operations
p) Supervise day-to-day activities of the company appointed field HES Advisor
q) supervision of the fulfilment of the conditions of any country seismic contract held by company and verify equipment and staff are met or exceeded the specifications of the contract
clearly communicate with representatives of the company r) in the field and with company staff in different offices

The ideal candidate will hold a certification or equivalent or expertise in Geology/Geophysics

View the original article here